emulsion layer
英 [ɪˈmʌlʃn ˈleɪə(r)]
美 [ɪˈmʌlʃn ler]
网络 乳化层; 乳液层
双语例句
- The photographic elements contain a blue-sensitive hydrophilic colloid silver halide emulsion layer.
卤化银感光材料的冲洗照像材料含有亲水胶体的感蓝卤化银卤剂层。 - It turns out that by using proper screen frame, mesh, and mirror-surface treatment emulsion can help to achieve ideal printing effects& proper thickness of nickel electrode layer.
结果表明.通过选用合适的网框、网布，使用镜面处理感光胶的制版技术.可以达到理想的印刷效果及合适的镍电极层厚度。 - Preparation of a Core-shell Silver Halides Emulsion For Color Negative Red-sensitive Layer
彩色底片感红层卤化银乳剂的研制 - Mainly is described the principle and practical effect of increasing the speed of a color separation emulsion layer by means of coating closely an emulsion sub-layer containing fine AgX grains, which reflects diffuse light upon the front color separation layer, thus increases its speed.
着重介绍了通过在分色感光层的下面，再涂一层卤化银颗粒较细小的乳剂层，引起漫反射光提高该分色感光层感光度的原理和实效。 - The TEM showed that the emulsion particles had obvious core-shell structure, the inner core layer was acrylate polymer and the outer shell layer was organosilicon polymer.
TEM观察结果显示，硅丙乳胶粒子呈明显的核壳结构，内核层为丙烯酸酯聚合物，外壳层为有机硅聚合物。 - Preparation of High Chloride Emulsion for Blue-Sensitive Layer in Color Paper
彩色相纸感蓝层富氯乳剂的研制和应用 - When the crude oil reacted with NaOH/ ORS-41 solution, a mixed emulsion was formed with the upper layer of W/ O emulsion and the lower layer of O/ W emulsion.
原油与NaOH和ORS-41混合溶液作用时，形成上层为W/O型乳状液，下层为O/W型乳状液的混合体系。 - The catalytic layer of the hydrogen diffusion electrode was fabricated by mixing the polytetrafluoroethylene emulsion with WC and pressed under pressure with hydrophobic layer to form the porous electrode.
把碳化钨和聚四氟乙烯乳液、碳黑相混和，加工成防水型氢扩散多孔电极。 - This shows that classic double electrode layer theory only suits to the crude oil emulsion system with higher ion strength and thinner double electrode layer, which will play an important role in the development of the double electrode layer theory.
说明对原油乳状液体系，经典双电层理论只适用于离子强度较高、双电层厚度较小的体系.这一结论将对双电层理论的进一步发展起到一定的促进作用。 - The paper quoted datas showing in details the influence of the thickness of the emulsion sob-layer and its AgX grains size on the speed of the front emulsion layer.
文中较详细地阐明了下层乳剂层的厚度和卤化银颗粒大小对上层乳剂层感光度的影响。 - In oil content determination of oil-bearing waste water, We controled temperature And added in emulsion splitter to break emulsion layer between oil and water, eliminate activation of polymer.
本文论述在对含油废水含油量测定时，通过控制温度和加破乳剂的方法，解决油水界面乳化层问题，消除聚合物的活化作用影响，使测定结果更为准确。 - This paper presents a review of new advancements of a new photographic system, namely a color negative film having a magnetic recording layer coated on the opposite side of the AgX emulsion layer, briefing its structure and characteristics.
本文概述了未来照相体系的新进展：含磁记录层的彩色底片，其结构和性能特点，简介了其制造、冲洗加工和应用实例。 - Indoor curde emulsion demulsifying dehydration test of the FPW 320 to various polymer cut shows that when increasing dehydration speed, the after dehydration oil cut in sewage decreases and the emergence of emulsion layer decreases.
室内经用不同聚合物含量的原油乳状液破乳脱水效果表明，提高了破乳速度，降低了脱后污水含油量，并且减少了乳化层的产生。 - Through the measurement of the interface between caustic liquid and diesel oil the principle of measuring the liquid interface by using ultrasonic technology and the circuit composition are described. The effects of temperature, media composition and emulsion layer on measurement are presented and compensation methods are given.
文中结合碱液与柴油界面的测量问题，叙述了利用超声技术测量界面的原理和仪器的电路组成，介绍了温度、介质成分和乳化层对测量的影响与补偿方法。 - A method of forming silver diffusion lithographic plate, with more particularly to preparing a silver halide emulsion layer and image receiving layer containing nuclear for physical development is introduced.
以卤化银乳剂层和含有物理显影核接受层的制备方法为重点，介绍了银盐扩散胶印版的制造方法。 - Focusing on problems as cracking on coating easily produced on passenger car friction sleeves manufactured with polytetrafluoroethylene emulsion solution spraying technology, the triple layer compostie self lubricated material developed with modified polytetrafluoroethylene paste material rolling technology is put forth to be rolled into friction sleeve.
针对目前采用聚四氟乙烯乳液喷涂工艺生产的客车摩擦套易产生涂层龟裂等问题，提出采用改性聚四氟乙烯糊料轧制工艺研制的三层复合自润滑材料，再卷制成摩擦套。 - Under these conditions, the yield of free oil reached 84.24%. Technology for extracting most part of free oil after centrifuging was adopted. The residue of free oil from the emulsion layer was obtained by adding Saccharomyces cerevisiae.
在此条件下清油提取率可达到84.24%。采用先离心提取大部分油脂，再添加酵母菌进行酒精发酵的工艺得到残留在乳化层中的油脂。 - Xanthan gum, sodium alginate and CMC were chosen as thickening agents and the relative emulsion layer volume was as index to judge of emulsion stability.
选择了黄原胶、海藻酸钠和CMC三种增稠剂，以乳化相对层体积为指标，确定了对体系稳定性较好的增稠剂为黄原胶，添加量为0.06%。 - The difficulty of breaking process of emulsion is the oil-water layer of the dispersed phase, instead of the flocculation of droplets.
低温煤焦油破乳过程的难点是分散相液珠的油-水分层，而不是液珠的絮凝。